Series 217B

 The 2" size series 217 valve is available as standard 2-way normally closed, normally open or hydraulic operated. The 217 offers a flow control handle for reducing the downstream flow. The valve can be plumbed in angle or globe configuration. The 217 is a diaphragm type valve constructed of UV and chemical resistant PVC plastic.

Designed to operate at pressures from 20-125 psi. with an optimum flow range of 20-120 GPM. An external manual bleed is offered. The slow close feature prevents water hammer. Available seat seal elastomers are standard Buna-n (Nitrile) with optional Fluoroelastomer (Viton).

Note: The solenoid coil is available in all listed voltages and solenoid types.

 

Materials
Seals Nitrile, Fluoroelastomer (Viton)
Internal Wetted Stainless Steel
Components (300 and 400 Series)
PVC and Santoprene diaphragm
and Buna-n seat seal
Port Size 2 inch NPT female inlet and outlet
Fluid Temperatures Maximum to 120°F
 
Electrical
Solenoid Voltage AC 50/60 Hz-12, 24, 120 or 240 volts DC-6, 12, or 24 volts Available in series 100 through 500 series solenoid coil designs
Power
Consumption		 AC-5 watts, DC-6 watts
Coil Construction Standard Class A (105°C)
Call for special needs

 

 


Industrial Plastic Valves
909 West Long St.
Carson City, NV 89703
Ph: 775.883.6108
FAX: 775.883.6180