Series 300

The series 300 and 400 solenoid valves offer the user a lightweight, compact size “C” frame type molded coil. The series 300 features 18” long lead wires, while the series 400 gives the user a quick connect ¼” spade contact design. The valves are available in all flow pattern configurations. The solenoid base threads are standard brass or optional stainless steel. All voltages and elastomer types are available with
these solenoid valves.

Note: The solenoid valve series number identifies the solenoid type construction only. The solenoid coil can be configured with all 2 or 3 way flow patterns, body materials, voltages and elastomers.

 

Materials
Seals Nitrile, Fluoroelastomer, or EPDM
Internal
Components		 Stainless Steel (300 and 400 series)
Shading Ring
(AC units)		 Copper or Silver
Yoke Zinc Plated Steel or Stainless Steel
Valve Body Material Glass Filled Polypropylene, Brass or Stainless Steel
Top Fitting 1/8 inch NPT (female) Brass or
Stainless Steel
(3-way or 2-way
NO)		 1/8 inch Brass barb, 10-32 (female) thread
Special voltages, coil construction, seals, materials, etc. are available.
 
Electrical
Voltages Available AC 50/60 Hz-12, 24, 120 or 240 volts DC-6, 12, or 24 volts DC Latching - 9, 12, 18 or 240 volts
Power
Consumption		 AC-5 watts, DC-6 watts
Coil Construction Class A (105°C)
Coil Encapsulant Thermoplastic Polyester (PBT)
Coil Leads
(Series 300)		 18 AWG Stranded Copper
Cross Link Polyethylene Insulation (UL type 3173)
Operating Temperature to 120°C (49°C)

 

 


Industrial Plastic Valves
909 West Long St.
Carson City, NV 89703
Ph: 775.883.6108
FAX: 775.883.6180