<back to products | series 214 printable specs    

Series 214

 The 1" size series 214B valve is available as standard 2-way normally closed, normally open or hydraulic operated. The 214 offers a flow control handle for reducing the down stream flow. The valve can be plumbed in angle or straight through globe configuration. The 214 is a diaphragm type valve constructed of UV and chemical resistant PVC plastic.

Designed to operate at pressures from 20 - 150 psi. with an optimum flow range of 5 - 35 GPM. An external manual bleed is offered. The slow close feature prevents water hammer. Available seat seal elastomer is standard Buna-N (Nitrile).

Note: The solenoid coil is available in all listed voltages and solenoid types.

 

Materials
Seals Nitrile
Internal Wetted Stainless Steel
Components (300 and 400 Series)
PVC and elastomer type
Port Size 1" inch NPT female, inlet
and outlet
Fluid Temperatures Maximum to 120°F
 
Electrical
Solenoid Voltage AC 50/60 Hz-12, 24, 120 or 240 volts DC-6, 12, or 24 volts Available in series 100 through 500 series solenoid coil designs
Power Consumption AC-5 watts, DC-6 watts
Coil Construction Standard Class A (105°C)
Call for special needs